Perlite Plaster

Hand-applied plaster with increased insulation properties..

Application area

On Concrete, Aerated Concrete, Pumice Block, Brick Surfaces…

General features

Product description

Hand Applied Plaster is a gypsum-based interior surface plaster with increased heat and insulation properties.

Content Information

Calcium Sulfate Hemihydrate+Calcium Carbonate+Lime+Expanded Perlite+Tartaric Acid+Cellulosic Ether+Sodium Alkyl Sulfate

Physical and Chemical Properties

Form: Powder
Smell: No smell
Color: White, yellowish
Water Solubility: Soluble in water

Relevant Standards/Declarations

TS EN 13279-1: Building and Plaster Plasters - Light plaster plaster for building (Hand applied plaster) B4/20/2 CE Declaration

Scope of application

Concrete Exposed concrete Pumice block It is applied on brick surfaces.

Packaging

Polypropylene laminated bag, 35 ±%2

Storage conditions

It should be kept closed in its original packaging, in a dry place and on a pallet.

Advantages

Due to its chemical structure, it does not create bacteria, mold and fungus. It has fire retardant properties due to the water in its structure. It is sound absorbing because it has a porous structure. It is a building material with low thermal conductivity. It balances the humidity of the environment and creates a healthy environment. The length of the processing time provides comfortable and waste-free application.

Application Surface Features

Application ambient temperature should be minimum + 5 ºC. Substances that prevent adhesion (dust, oil, etc.) on the application surface are cleaned. Dry, hot and highly absorbent surfaces should be wetted with water before application. Plaster mesh should be used to prevent cracking at the junctions of different materials. The surface of smooth-surfaced ceilings should be roughened before plaster application or primed with a material that ensures the mortar adheres to the surface. Pan applications should be done thinly and in one layer.

Preparation of Mortar

Water appropriate to the amount of mortar is poured into a clean container (water / plaster ratio: 10 kg ALL Perlite Plaster is added to 6 liters of water). ALL Hand Applied Plaster is sprinkled on water. Wait 1-2 minutes for the mortar to fully contact the plaster and water and sink. The mortar obtained after mixing is ready for use. The mortar should be used within 70-80 minutes.

APPLICATION

The smoothness of the surface to be applied is checked, and the plaster thickness is determined according to the surface smoothness. Anos suitable for the thickness of the plaster are placed. Mortar is applied to the surface with a trowel or plaster shovel. The surface is leveled and excess mortar is removed from the surface. The surface is smoothed with a steel trowel after 45 minutes to obtain a shiny surface. Before painting, ALL Thin Applicable Plaster is applied to the surface.

Shelf life

6 months from the date of production.

Technicial Specifications

Technical specifications may vary depending on site conditions and ground characteristics.

Technicial Specifications